Takagi Tankless Water Heaters Review

The Takagi tankless water heaters supply you with an endless supply of hot water, since there is no tank to fill. Depending on the model, these tankless water heaters deliver between 200 and 500 gallons of fresh, hot water every hour, when you need it. The Takagi tankless water heaters are ideal for the home, commercial space or anywhere that you require a source of hot water.

The TK4 model is for light residential use and can be used for special projects. It weighs just 40 pounds and is only 13.8 inches wide, so the ultra-compact design lets you mount it on a wall. This unit begins heating water at 1/2 gallon per minute and keeps the endless supply of hot water running to a maximum flow rate of 7 gallons per minute.

The T-KJr2 is the smallest unit offered by Takagi in the tankless water heaters. It is perfect for the small apartment and radiant heating applications. The T-KJr2 can meet all of the hot water needs for a small home or an apartment that has one or two bathrooms as well as for a small office space. It can be wall mounted and it has an efficiency rating of 81% using natural gas and 83% with natural gas.

For installing outdoors, the T-K4-OS model has a built-in power venting system and it does no require any additional Category III venting or vent caps. This model has a thermal rating of 83% for natural and propane gas so it is extremely efficient and environmentally friendly. It only burns gas when you need hot water, so installing this water heater can help you save up to a whopping 45% off your monthly home gas bill. You are offered four temperature settings that range from 113 to 167 degrees.

The Mobius T-M50 or “The Monster” as it is called, is designed for commercial applications. This unit features a dual-combustion system for added redundancy. In the case of an emergency, if one system fails, the other systems continues to run. You can easily link up to four units together with the T-M50 and you can connect up to 10 units and generate over 14.5 GPM. The T-M50 uses HRS copper-the highest grade copper in the industry, so it is very resistant to erosion and leakage.

The Takagi tankless water heaters are efficient, reliable and the logical way to get hot water to your home, business or commercial space, as you will save both money and space.

Leave a Reply

Your email address will not be published. Required fields are marked *